43 Eagle Drive Fairfield CT

Tile Refinishing


Why Reglaze Your Tile?

Refinishing your tile is the most economical and efficient way to revitalize your bathroom, at a mere fraction of the cost of replacement. Tile replacement involves not only the cost of new tile, but also replacing the wallboard, floor and sub-floor, plus any hardware which might be damaged during the removal of the tile. This is very time consuming and expensive! Reglazing / refinishing will allow to realize spectacular savings, often as much as 90% over the cost of replacement!

Quickly Transform

this is a subtitle

Stained, chipped, and hard to keep clean tiles are unsightly, unhealthy and can create a negative impression to your guests. Re-Glazing / Refinishing your tile will give them a smooth, glossy finish within a matter of hours. This non-porous finish meets and exceeds the original manufacturer’s specifications for stain and acid resistance.

The reglazing / refinishing process is a remarkable time-tested method that was developed specifically for bathtub and tiled wall finishing. The secret lies in the ability of the compounds to fuse themselves to the original surface through a molecular bonding action. The new finish becomes a permanent part of the existing fixture, unlike bathtub liners, which can crack, trapping unsanitary water and creating a health hazard.

Tile Reglazing Process

this is a subtitle
  • Cover and protect all bathroom fixtures, floor, cabinets, etc.
  • Remove all old caulk between Bathtub and wall (we do not caulk over old caulk we start with a clean caulk line for a quality bond).
  • Remove all caulk from walls and corners.
  • Remove any loose or damaged grout.
  • Clean Bathtub and all other areas to be re-glazed (removes all built-up soap-scum, dirt, grime, caulk/silicone etc. from bathtub to insure a good bond).
  • Re-Grout wall tiles where needed.
  • Spray 2 coats of Cross-link Primer (this chemically bonds new glaze to bathtub) Cross-link primer has been field tested for over 15 years on tens of thousands of bathtubs.
  • Spray 3 coats of Synthetic Porcelain (white, bone or almond) Glaze will be dry in 15 minutes; bathtub can be used in 24 hours. Re-Caulk bathtub area, all walls and corners.
  • Clean and vacuum entire bathroom.
  • Bathroom can be used same day!